Home > News > Content

Quartz Slab The Requirements Of

Quartz Slab The rubber Quartz board should be stored indoors, Quartz Slab or be covered with a lower berth. Away from inflammable and explosive items, and water, oil, acid and other easy to pollute rubber quartz plate bonded surface of the goods, so as not to cause adhesion, Quartz Slab drum and other phenomena.

II. Requirements for laying Foundation bottom

1, the base surface must be flat cement floor, no obvious uneven.

2, the base surface has sufficient strength, no sand, shelling phenomenon.

3, laying the ground must be dry, clean, no excessive dust, water and oil stains.

III. Laying method

1, according to each step of the horizontal surface and the total length of the vertical cut out the corresponding size of the rubber quartz plate (plus appropriate allowance, the general minimum pressure 10mm).

2, on the basis of the base to be laid and rubber quartz plate on the back of uniform gelatinize (rubber Quartz Plate Special adhesive), when the glue will dry, with the fingers touch non-stick hand is appropriate, block by line to paste (left and right, up and down), and with the rubber hammer knock real can.

Quartz sand is a kind of non-metallic mineral matter, is a kind of hard, wear-resisting, chemical property stable silicate mineral, its main mineral constituent is SiO2, quartz sand color is milky white, or colorless translucent, hardness 7, quartz sand is an important industrial mineral raw materials,Quartz Slab  not chemical dangerous goods, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemical, plastic, rubber, abrasive and other industries.

Quartz sand can make glass, refractories, smelting ferrosilicon, metallurgy flux, ceramics, abrasive materials, foundry, quartz sand in the building using its strong acid-resistant medium leaching ability, used to produce acid-resistant concrete and acid-resistant mortar. SiO2 's unique physical, chemical and optical properties make it more and more important in many High-tech products. For example, IT industry's core technology products-computer chip, optical fiber, electronic industry resonator, new electric light source, high insulation sealing materials, aerospace instrumentation, military technology products, special optical glass, Quartz Slab chemical analysis instruments and so on, are inseparable from these basic raw materials. Crystal and shape beautiful quartz sand can be used as glasses and valuable crafts, the use of quartz crystal piezoelectric, can be produced without wire industry frequency stabilizer, quartz filter. Can make a variety of lenses, reflectors, spectral tubes, Quartz Slab light guide tubes and optical instruments in the prism, polarized mirror and so on. The application of hydrothermal temperature difference method has been widely used in the fabrication of piezoelectric components. In the chemical industry, quartz sand can be used for acid and temperature-resistant instruments and utensils; in the electrical industry, quartz is often used as an excellent insulating material, quartz sand is also the glass, enamel and refractory bricks in the manufacturing industry, Quartz Slab excellent raw materials; The excellent performance of smelting quartz has also been widely used in metallurgy, food, pharmacy and papermaking industry. The Quartz stone (sand) exported is mostly used in metallurgy and refractory industry.