Home > News > Content

Quartz Stone Have A Certain Demand

Quartz stone is a kind of artificial stone made of quartz sand and resin. Its biggest advantage is the wear-resisting is not afraid scratches, Quartz Stone heat-resistant good, not easy deformation. It can be said that quartz stone is currently the cabinet counter surface of the first surface, but also the highest utilization rate of one table, in many materials quartz stone price is the highest.

Quartz Stone Mesa Main ingredient is silica, the hardness is highest, the quartz stone of the market is synthesized by quartz crystal and resin, Quartz Stone generally all mark quartz content is about 93%. Therefore, the likelihood of rupture is very small, and also more wear-resisting. At present, the thickness of quartz stone in China is: 8mm, 15mm, 20mm and 30mm, the most common on the market is 15mm. When it comes to this, a lot of people want to know if the thickness of the plate is thicker, the better the quality is.

In fact, the thickness of quartz stone is not the standard of judging the quality, because the use of different range of thickness has certain requirements. For example, cabinet counters, cabinet counters can be divided into pad-type and pad-plate, the choice of pad-type can use 8mm or 15mm for the best, the need for the use of pad-type in the ground bonding reinforcement (back plate).Quartz Stone Most of the use of the ground using 20mm or 30mm plate, wall most of the choice of thin. In fact, there is no good or bad, only suitable and unsuitable. The scope of application is different, so the quality requirements are different.

The use of quartz stone cabinets comfortable with the installation of Quartz stone table is closely related to the installation process should pay attention to what matters? Xiao Bian in this collation of some table installation knowledge, here to share.

Before installation need to check the flatness of the cabinet, check the size of the quartz stone table and cabinets exactly match. If the error is produced, the quartz stone countertops need to be processed, or the cabinets will be trimmed.

In measuring the depth of the cabinet, Quartz Stone the table needs to set aside 4cm size, so that the installation of the next hanging Edge Bar

In the Mesa installation, as far as possible in the construction site to avoid a large range of quartz stone cutting, opening holes, on the one hand, in order to eliminate the cutting dust pollution construction site, on the other hand is to prevent the error caused by cutting.

Because the quartz stone Mesa hardness is high, the density is big, therefore the processing technology request is higher. Therefore, the Quartz stone Mesa installs, Quartz Stone should contact the professional quartz stone installation master, and uses the specialized tool to carry on the installment, must not blindly install, lest cause unnecessary trouble.

Quartz stone Mesa Maintenance Common Sense

1, do not heat or hot pot directly or long put on the table

Hot pots, hot pots or other utensils, which are removed directly from the stove or oven or microwave oven, will damage the table.

2, the operation should try to avoid using sharp objects to scratch the table

Whichever table you choose, Quartz Stone you should cut the food on the chopping board, in addition to leaving the knife marks, damage blade outside, but also to do a better cleaning and health.

3, the table as far as possible to keep dry

Keep the table clean, as far as possible not to soak or water the table for a long time, keep the table clean and dry.

4, Prevent corrosive chemicals Contact table

As far as possible to avoid the relevant corrosive chemicals on the table, if inadvertently contact with a large number of soap water rinse surface or consult with relevant professionals.